Asset Management - Adding, Editing or Deleting a Belt Section

To Add A Belt Section

To add a belt section in PDS Asset Management, go to Navigation >> Asset Management >> in the left slider menu.

Use the navigation tree to find the required conveyor then navigate to Belt Sections.

Click on Create

In the Create Asset screen, complete the necessary fields. NOTE: You will have to enter the Specification, Width, Skirt Width, Top Cover and Bottom Cover thickness.

Scroll down to the bottom of the screen and click on Save and Close.

To Edit A Belt Section

To edit a belt section in PDS Asset Management, go to Navigation >> Asset Management >> in the left slider menu.

Use the navigation tree to find the required conveyor then navigate to Belt Sections.

Click on the edit icon to the left of the belt section

Complete the necessary fields and click on Save and Close

To Delete A Belt Section

To delete a belt section in PDS Asset Management, go to Navigation>> Asset Management>> in the left slider menu.

Use the navigation tree to find the required conveyor then navigate to Belt Sections.

Click on the drop-down arrow to the left of the belt section and select Delete.

 

prev next
Was this article helpful?
0 out of 0 found this helpful

Articles in this section

prev next

Related sections