Idler Management - Closing Out Idler Failures

To close out a single Idler or Structure failure

  1. Either click on the down arrow to the left of the failure and select Close Out or click on the record and select Close Out on the top bar. A “Close Out Idler Record?” pop-up window will appear with a warning saying “Are you sure you want to close out this item?”.
  2. Enter the Work Order number if required, the Close Out Date and the Maintenance Activity then click on Okay.
    Idler_Closeout_1.jpg

To close out multiple Idler or Structure failures

  1. Hold the Ctrl key (to select individual failures by clicking on them) or the Shift key (to select failures in a block) to select the required failures. In the example below we have selected three of the four failures.
  2. Click on Close Out and a “Close Out Idler Record?” pop-up window will appear with a warning saying “Are you sure you want to close out (x) records?”. Enter the Work Order number if required, the Close Out Date and the Maintenance Activity then click on Okay.
    Idler_Closeout_2.jpgIdler_Closeout_3.jpg

prev next
Was this article helpful?
0 out of 0 found this helpful

Articles in this section

prev next

Related sections