Creating an inspection

On the toolbar, click on the Plus web_icons_plus.PNG icon to create a new inspection. There are three options to choose from on the Create Inspection pop-up.

  • Tapping on OK will create an inspection with no faults found.
  • Tapping on OK with Details creates an inspection with no faults found but opens in edit mode to allow comments to be added and photos attached.
  • Tapping on Not OK creates an inspection with faults found, allow a condition code to be specified, fault codes to be selected and photo attached.

web_inspections_create.PNG

On the Create Inspection page, enter the fault information and complete all mandatory fields.

Note, all drop down values need to be configured by a Business Administrator.

A warning message will appear if all mandatory fields have not been completed.

web_inspections_create_detail.PNG

Attachments, such as photos of the fault, can be added at anytime by clicking the Attachments tab and then the Add Attachments button. A maximum of 10 photos can be attached.

web_inspections_add_attachments.PNG

Click the Save button to save the inspection, click on the Cancel web_icons_cancel.PNG icon to cancel without saving.

prev next
Was this article helpful?
0 out of 0 found this helpful

Articles in this section

prev next

Related sections