Creating a structure failure

At the Area functional location, tap on the Plus android_phone_icons_plus.PNG icon then tap on Create Structure to create a new structure failure.

android_phone_idler_create.png

android_tablet_idler_create.png

On the Create Structure page, enter the failure information and complete all mandatory fields. 

Mandatory fields include "Structure Type" and "Failure Type". All other fields are optional, comments can be added as required.

A warning message will appear if all mandatory fields have not been completed.

android_phone_structure_mandatory_fields.png

android_tablet_idler_structure_mandatory_fields.png

Using the "Frame" and "Frame To" fields, users can create multiple structure failures between consecutive frames (between the Frame and Frame To field).

Please note, any fields which have a drop-down list can be configured in the web version if required.

At Risk can be selected as required to highlight any idler (or structure) failure that is determined to have a higher potential to cause collateral damage or downtime.

Attachments, such as photos of the failure, can be added at anytime by tapping on the paper clip icon on the top right of the screen, then tapping the Plus android_phone_icons_plus.PNG icon (refer Taking / adding / deleting a photo). A maximum of 10 photos can be attached.

Tap the Tick android_phone_icons_tick.PNG icon to save.

android_phone_structure_save.png

android_tablet_idler_structure_save.png

After creating new failures it's recommended that users synchronise their device.

prev next
Was this article helpful?
0 out of 0 found this helpful

Articles in this section

prev next

Related sections