Why are the wear rate calculations wrong?

[Refers to PDS Wear Management - Conveyor Belt]

The skirt width must be set for any belt sections that have wear data to calculate wear correctly.

To set the skirt width value, log into the web software and navigate to the conveyor. Click on the Edit (pencil) icon for the belt section.  On the Edit screen, click on the Edit button and add the skirt width as shown, then save the record. The wear rates will update on save.

Skirt_Setting.jpg

prev next
Was this article helpful?
0 out of 0 found this helpful

Articles in this section

prev next

Related sections