At the Area functional location, tap on the Plus 
icon then tap on Create Structure to create a new structure failure.
On the Create Structure page, enter the failure information and complete all mandatory fields.
Mandatory fields include "Structure Type" and "Failure Type". All other fields are optional, comments can be added as required.
A warning message will appear if all mandatory fields have not been completed.
Using the "Frame" and "Frame To" fields, users can create multiple structure failures between consecutive frames (between the Frame and Frame To field).
Please note, any fields which have a drop-down list can be configured in the web version if required.
At Risk can be selected as required to highlight any idler (or structure) failure that is determined to have a higher potential to cause collateral damage or downtime.
Attachments, such as photos of the failure, can be added at anytime by tapping on the paper clip icon on the top right of the screen, then tapping the Plus icon (refer Taking / adding / deleting a photo). A maximum of 10 photos can be attached.
Tap the Tick 
icon to save.
After creating new failures it's recommended that users synchronise their device.